| MOQ: | 1pc |
| Price: | 7000-100000 USD |
| Standard Packaging: | With regular Film and Carton |
| Delivery Period: | 20 DAYS After Deposit |
| Payment Method: | T/T |
| Supply Capacity: | 20SET/MONTH |
Gantry-type automatic reciprocator with a multi-gun spray head, grated conveyor handling and integrated overspray capture — engineered for consistent film build on doors, boards and custom furniture components.
CoatTech Intelligent Equipment (Guangzhou) CO., LTD presents its automatic reciprocating spray line for flat workpieces, shown in the latest shop-floor footage from our equipment build and test area. The system is built for wooden doors, panel stock, cabinet components and custom furniture parts that require a uniform, repeatable finish across the entire surface.
Instead of manual spray passes, a gantry-mounted reciprocating carriage carries a multi-gun spray head across the workpiece at a controlled, constant speed. Panels travel through the spray zone on a grated conveyor bed, so loading, coating and discharge form one continuous flow. The result is a stable fan pattern, even film thickness and a clean, repeatable finish — with far less dependence on operator technique.
|
Line module |
Function |
Seen in the footage |
|
Gantry & Z-axis |
Rigid overhead beam with a vertically guided spray head |
Bellows-protected vertical stroke; colour-coded air and fluid lines |
|
Reciprocating carriage |
Traverses the full panel width at a controlled, constant speed |
Spray head sweeping across the workpiece |
|
Multi-gun spray head |
Pivoting assembly holds and angles multiple spray guns |
Fine, even mist at the panel surface |
|
Grated conveyor bed |
Moves flat panels smoothly into and out of the spray zone |
Large white panel carried through the cell |
|
Overspray extraction |
Water-wash or dry-filter capture at source (configuration-dependent) |
Grated floor beneath the workpiece |
|
Booth enclosure |
Stainless steel walls, guarded service lines, easy to clean |
Clean, serviceable spray cell |
Modules shown in the footage. Final configuration is confirmed during process review against your panel drawings, coating material and target capacity.
· Gantry and Z-axis guidance — a rigid overhead beam carries a vertically guided spray head; a protective bellows covers the vertical stroke, with colour-coded air and fluid lines routed neatly to the gun assembly.
· Multi-gun spray head — a pivoting gun assembly holds multiple spray guns and keeps the fan oriented to the panel while the carriage reciprocates across the full working width.
· Continuous panel handling — a flat grated conveyor and roller bed moves large panels smoothly into and out of the spray zone for steady, linked production.
· Overspray control — a grated floor works with a water-wash or dry-filter extraction system (configuration-dependent) to capture overspray at source and keep the working area clean.
· Controlled atomisation — a light, even mist is visible at the panel surface during the pass, indicating fine atomisation and stable fan coverage rather than heavy, wet application.
· Industrial enclosure — stainless steel booth walls and guarded service lines make the station easy to clean and maintain in daily production.
· Programmable reciprocating motion — stroke, traverse speed and pass count are set to suit panel width and coating requirements.
· Uniform film build — constant carriage speed and a stable fan pattern help avoid streaks, missed areas, sagging and uneven gloss on large flat surfaces.
· Continuous panel flow — the grated conveyor bed supports steady in-feed and out-feed, whether the station runs as a stand-alone cell or as part of a longer line.
· Configurable gun layout — the number, position and angle of spray guns can be matched to the coating material and the required coverage.
· Overspray management — grated flooring plus water-wash or dry-filter extraction collects overspray at source, protecting the booth environment and downstream filtration.
· Easy-clean construction — stainless steel enclosure, protected vertical axis and orderly hose routing simplify routine cleaning and inspection.
· Integration-ready — available as a stand-alone spray station or embedded in a complete CoatTech smart painting line with pre-station, conveyor, flash-off and curing oven.
Wooden doors and door skins; MDF, HDF and plywood panels; veneered boards; cabinet doors and wardrobe panels; custom furniture components; and other flat blanks that require an even, repeatable topcoat.
· Consistent appearance — the same finish on every panel, shift after shift, rather than finish quality that varies by operator.
· Less rework — fewer runs, misses and uneven areas on large flat surfaces.
· Predictable labour — reduced manual spray exposure and a line paced by the conveyor, not by the operator.
· Cleaner booth — controlled overspray capture keeps the spray zone cleaner and makes filter maintenance more manageable.
· Repeatable throughput — a fixed spray cycle makes output easier to plan on repeat orders and batch runs.
Every line is engineered around the workpiece. Panel size and thickness range, conveyor width and speed, gun quantity and type, coating material, extraction method (water-wash or dry filter), and upstream and downstream modules are all confirmed during process review. Send our engineering team your panel drawings, coating material and target capacity, and we will propose a line layout and a quotation — not just a catalogue model.
Youtube Link for your reference:
https://youtube.com/shorts/T7EGIparEVs?feature=share
![]()
![]()
|
|
| MOQ: | 1pc |
| Price: | 7000-100000 USD |
| Standard Packaging: | With regular Film and Carton |
| Delivery Period: | 20 DAYS After Deposit |
| Payment Method: | T/T |
| Supply Capacity: | 20SET/MONTH |
Gantry-type automatic reciprocator with a multi-gun spray head, grated conveyor handling and integrated overspray capture — engineered for consistent film build on doors, boards and custom furniture components.
CoatTech Intelligent Equipment (Guangzhou) CO., LTD presents its automatic reciprocating spray line for flat workpieces, shown in the latest shop-floor footage from our equipment build and test area. The system is built for wooden doors, panel stock, cabinet components and custom furniture parts that require a uniform, repeatable finish across the entire surface.
Instead of manual spray passes, a gantry-mounted reciprocating carriage carries a multi-gun spray head across the workpiece at a controlled, constant speed. Panels travel through the spray zone on a grated conveyor bed, so loading, coating and discharge form one continuous flow. The result is a stable fan pattern, even film thickness and a clean, repeatable finish — with far less dependence on operator technique.
|
Line module |
Function |
Seen in the footage |
|
Gantry & Z-axis |
Rigid overhead beam with a vertically guided spray head |
Bellows-protected vertical stroke; colour-coded air and fluid lines |
|
Reciprocating carriage |
Traverses the full panel width at a controlled, constant speed |
Spray head sweeping across the workpiece |
|
Multi-gun spray head |
Pivoting assembly holds and angles multiple spray guns |
Fine, even mist at the panel surface |
|
Grated conveyor bed |
Moves flat panels smoothly into and out of the spray zone |
Large white panel carried through the cell |
|
Overspray extraction |
Water-wash or dry-filter capture at source (configuration-dependent) |
Grated floor beneath the workpiece |
|
Booth enclosure |
Stainless steel walls, guarded service lines, easy to clean |
Clean, serviceable spray cell |
Modules shown in the footage. Final configuration is confirmed during process review against your panel drawings, coating material and target capacity.
· Gantry and Z-axis guidance — a rigid overhead beam carries a vertically guided spray head; a protective bellows covers the vertical stroke, with colour-coded air and fluid lines routed neatly to the gun assembly.
· Multi-gun spray head — a pivoting gun assembly holds multiple spray guns and keeps the fan oriented to the panel while the carriage reciprocates across the full working width.
· Continuous panel handling — a flat grated conveyor and roller bed moves large panels smoothly into and out of the spray zone for steady, linked production.
· Overspray control — a grated floor works with a water-wash or dry-filter extraction system (configuration-dependent) to capture overspray at source and keep the working area clean.
· Controlled atomisation — a light, even mist is visible at the panel surface during the pass, indicating fine atomisation and stable fan coverage rather than heavy, wet application.
· Industrial enclosure — stainless steel booth walls and guarded service lines make the station easy to clean and maintain in daily production.
· Programmable reciprocating motion — stroke, traverse speed and pass count are set to suit panel width and coating requirements.
· Uniform film build — constant carriage speed and a stable fan pattern help avoid streaks, missed areas, sagging and uneven gloss on large flat surfaces.
· Continuous panel flow — the grated conveyor bed supports steady in-feed and out-feed, whether the station runs as a stand-alone cell or as part of a longer line.
· Configurable gun layout — the number, position and angle of spray guns can be matched to the coating material and the required coverage.
· Overspray management — grated flooring plus water-wash or dry-filter extraction collects overspray at source, protecting the booth environment and downstream filtration.
· Easy-clean construction — stainless steel enclosure, protected vertical axis and orderly hose routing simplify routine cleaning and inspection.
· Integration-ready — available as a stand-alone spray station or embedded in a complete CoatTech smart painting line with pre-station, conveyor, flash-off and curing oven.
Wooden doors and door skins; MDF, HDF and plywood panels; veneered boards; cabinet doors and wardrobe panels; custom furniture components; and other flat blanks that require an even, repeatable topcoat.
· Consistent appearance — the same finish on every panel, shift after shift, rather than finish quality that varies by operator.
· Less rework — fewer runs, misses and uneven areas on large flat surfaces.
· Predictable labour — reduced manual spray exposure and a line paced by the conveyor, not by the operator.
· Cleaner booth — controlled overspray capture keeps the spray zone cleaner and makes filter maintenance more manageable.
· Repeatable throughput — a fixed spray cycle makes output easier to plan on repeat orders and batch runs.
Every line is engineered around the workpiece. Panel size and thickness range, conveyor width and speed, gun quantity and type, coating material, extraction method (water-wash or dry filter), and upstream and downstream modules are all confirmed during process review. Send our engineering team your panel drawings, coating material and target capacity, and we will propose a line layout and a quotation — not just a catalogue model.
Youtube Link for your reference:
https://youtube.com/shorts/T7EGIparEVs?feature=share
![]()
![]()