| MOQ: | 1 |
| Price: | USD8000-USD12000/SET |
| Standard Packaging: | With regular Film and Carton |
| Delivery Period: | 15 DAYS After Deposit |
| Payment Method: | T/T |
| Supply Capacity: | 30SET/MONTH |
Dual-Mode IR + Convection Batch Curing Oven
DuoCure™ CT-DC Series — Dual-Mode IR + Convection Batch Curing Oven
One chamber. Two recipes. One capital investment.
DuoCure™ is a batch curing oven engineered for job shops and new production lines that must cure very different parts without buying two separate ovens. Zoned infrared radiation delivers rapid heat-up to high-thermal-mass steel, while high-capacity recirculating convection wraps hot air around complex, overlapping geometries. Operators switch between IR-heavy and Convection-heavy recipes from a single PLC touch screen.
Designed for electrostatic powder coating on heavy-duty leaf springs, agricultural implements, trailer chassis and structural steel components up to 3,000 × 1,500 × 1,000 mm.
|
02 · Key Features |
Two recipes, one chamber: IR-heavy for heavy steel, Convection-heavy for thin and complex parts — no second oven, no second foundation, no second footprint.
Zoned infrared: 4–6 independently controlled IR zones across roof, side walls and floor, with SCR power control for smooth 0–100% adjustment.
High-capacity convection: VFD-driven recirculation fans with adjustable nozzles deliver uniform airflow into recesses, overlaps and shadowed cavities.
Part temperature control: IR pyrometer and part-attached thermocouple interfaces monitor the workpiece itself, not just the air inside the chamber.
Recipe storage: PLC + HMI touch screen stores Spring and Agri recipes, including zone power, airflow, set-point and dwell time, for one-touch changeover.
Built for large parts: truck-in trolley / floor rail loading with a clear internal chamber of 3,500 × 2,000 × 1,500 mm (customisable).
Verifiable uniformity: designed for ±5–10°C across the work envelope, verified by a nine-point thermocouple survey and documented oven profiling.
Serviceable construction: 100–150 mm Rockwool insulation, galvanized steel interior, sealed door and anti-cold-bridge detailing; aluzinc or stainless interior available.
|
03 · Two Modes, One Chamber |
Mode A — IR-heavy | High Thermal Mass
For dense, flat steel components such as heavy-duty leaf springs up to 32 mm thick and 100 kg+ per assembly. Infrared power is raised to 70–85% while convection runs at 30–40% for trimming and uniformity. Parts are loaded in a single layer to keep a clear line of sight to the emitters. IR brings the steel surface up quickly; the core follows by conduction, which is why dwell time is always confirmed with a part-attached thermocouple rather than assumed from air temperature.
Mode B — Convection-heavy | Complex Geometries
For thinner sheet-metal assemblies such as disc harrows, ploughs and trailer chassis with overlapping sections. IR drops to 20–35% and convection rises to 70–85%. Top-and-bottom supply/return airflow with adjustable deflector nozzles wraps hot air around the shape, curing powder in crevices that radiation alone cannot reach, while lower radiant power prevents burn-through and colour drift on thin metal.
Honest engineering note: a single chamber serving both part families is a deliberate compromise, not a perfect substitute for two dedicated ovens. For sustained high volume we will recommend a two-chamber or two-zone layout. Our engineers will model your batch load and confirm the achievable cycle before any performance figure is fixed.
|
04 · Technical Specifications |
||
|
Item |
Specification |
Note |
|
Model |
CT-DC 3500 (DuoCure™ Series) |
Other chamber sizes on request |
|
Oven type |
Batch / truck-in, IR + forced convection |
Floor rail trolley; overhead conveyor interface on request |
|
Clear internal chamber |
3,500 × 2,000 × 1,500 mm (L × W × H) |
Customisable |
|
Max workpiece |
3,000 × 1,500 × 1,000 mm |
Allowance for jigs, emitter clearance and airflow |
|
Cure schedule |
Part temperature 180–200°C; dwell 8–10 min |
To be confirmed against the powder TDS and validated by sample trial |
|
Temperature uniformity |
Designed for ±5–10°C across work envelope |
Verified by nine-point thermocouple survey (TUS) |
|
IR heating |
Electric short / medium-wave emitters, 4–6 zones |
Indicative installed IR capacity 130–250 kW |
|
Convection |
VFD-driven high-capacity recirculation fans |
2–4 fans, top/bottom supply and return, adjustable nozzles |
|
Total connected load |
Indicative 150–350 kW |
Subject to heat balance, batch weight and ramp-up target |
|
Alternative heat source |
Gas catalytic IR (LPG / Propane) + convection |
Optional; indicative 3–8 kg LPG per batch, subject to configuration |
|
Control |
PLC + HMI touch screen, recipe storage, SCR power control |
Spring / Agri recipes, alarms and trend logging |
|
Temperature sensing |
IR pyrometer + part-attached thermocouple ports |
Oven profiling report supplied at commissioning |
|
Insulation |
100–150 mm Rockwool / mineral wool |
Adds approx. 100–150 mm per side to outer dimensions |
|
Interior |
Galvanized steel |
Aluzinc or stainless steel optional for continuous 200°C duty |
|
Safety design basis |
NFPA 86 (EN 1539 on request) |
Independent high-limit, safety interlocks, purge, explosion relief |
|
Power supply |
380–415V / 50Hz / 3-Phase, customisable |
415V / 50Hz / 3-Ph configured for East African industrial supply |
|
Loading |
Truck-in trolley on floor rail |
Jigs and fixtures engineered to part geometry |
Plain-text version — use this if your CMS breaks tables:
Model: CT-DC 3500 (DuoCure™ Series)
Oven type: Batch / truck-in, infrared + forced convection
Clear internal chamber: 3,500 x 2,000 x 1,500 mm (L x W x H), customisable
Maximum workpiece: 3,000 x 1,500 x 1,000 mm
Cure schedule: part temperature 180-200°C, dwell 8-10 min (to be confirmed against powder TDS)
Temperature uniformity: designed for ±5-10°C, verified by nine-point thermocouple survey
IR heating: electric short/medium-wave emitters, 4-6 independently controlled zones
Convection: 2-4 VFD-driven recirculation fans, top/bottom supply and return, adjustable nozzles
Total connected load: indicative 150-350 kW, subject to heat balance
Alternative heat source: gas catalytic IR (LPG/Propane) + convection, optional
Control: PLC, HMI touch screen, recipe storage, SCR power control, VFD fans
Sensing: IR pyrometer, part-attached thermocouple ports, oven profiling report
Insulation: 100-150 mm Rockwool; galvanized steel interior (aluzinc / stainless optional)
Safety design basis: NFPA 86 (EN 1539 on request), independent high-limit and interlocks
Power supply: 380-415V / 50Hz / 3-Phase, customisable
Loading: truck-in trolley on floor rail
|
05 · Heating Options: Electric vs Gas Catalytic IR |
Electric IR + Convection — standard configuration
Electric emitters reach full output instantly and shut down instantly. With SCR power control they can be modulated continuously across 4–6 zones, which is what makes rapid recipe changeover and tight uniformity achievable. Where two part families are cured in the same chamber on the same shift, this is the configuration we recommend.
Gas Catalytic IR (LPG / Propane) + Convection — optional configuration
LPG reacts flamelessly on a precious-metal catalytic surface and converts fuel energy directly into medium/far infrared radiation. Running cost can be roughly half that of electric IR, which suits sites with high electricity tariffs and a steady, repeatable product mix. The trade-offs are slower response, coarser power modulation and a substantially heavier safety package: gas train, pre-ignition purge, LEL monitoring, flame supervision, CO and ventilation interlocks, and explosion relief. Tell us your local tariff, gas availability and authority requirements and we will model the payback per batch.
|
06 · Control, Safety & Site Power |
Control: A PLC with HMI touch screen stores independent recipes for each part family. Zone power, airflow, set-point, ramp and dwell are recalled with one touch. SCR power controllers translate the recipe into actual emitter output; VFDs set convection intensity. Alarms, interlocks and temperature trends are logged for traceability.
Safety: The oven is designed to NFPA 86 as a basis, with EN 1539 available on request for projects following European practice. Safety functions — independent high-limit cut-out, purge, fan/gas/over-temperature/door interlocks and explosion relief — are hard-wired and do not depend on PLC software logic. Please confirm with your local authority and insurer which standard governs site acceptance before the technical agreement is signed.
Site power: Configurable for 380–415V / 50Hz / 3-Phase. In regions where supply voltage fluctuates widely, we recommend a wide-range control circuit, phase-sequence / phase-loss / over- and under-voltage protection and UPS support for the PLC and HMI. These conditions are recorded in the FAT/SAT scope so that acceptance criteria reflect the real grid, not an ideal one.
|
07 · Applications |
Heavy-duty leaf springs and suspension components, up to 32 mm thick and 100 kg+ per assembly.
Agricultural implements: disc harrows, ploughs, cultivator frames, harvester components.
Trailer chassis, truck frames, structural steel fabrications and welded assemblies.
Any mixed-product job shop curing high-mass and thin-gauge parts on the same line.
Electrostatic powder coating with Interpon® and equivalent polyester / epoxy-polyester systems; cure windows are always confirmed against the coating supplier's Technical Data Sheet.
|
08 · Complete Line & Related Equipment |
DuoCure™ is supplied as a standalone oven or as part of a complete surface finishing line. CoatTech designs and integrates:
Multi-stage immersion dip tanks — degreasing, rinsing, phosphating or silane conversion coating, and drying. Silane pretreatment runs at ambient temperature, produces almost no sludge and can be shared across steel, aluminium and galvanized substrates, reducing both CAPEX and effluent treatment on a new site.
Standalone powder spray booth — cartridge filter recovery, manual or automatic guns, colour-change options, overhead conveyor integration.
Automotive and industrial spray booths, 220°C high-temperature curing ovens for heavy components, conveyorised coating lines, and overhead electric retractable canopies for loading and staging areas.
Ask us for a single layout drawing covering pretreatment, powder application, curing and material handling, so that tank sizes, booth clearances and oven chamber dimensions are engineered as one system.
|
09 · Commissioning, Training & IR Profiling |
On-site commissioning: CoatTech engineers supervise installation, dry-run, safety interlock verification and first-article production. Scope, engineer-days and travel arrangements are quoted separately.
Operator training: recipe changeover, daily checks, emitter and fan maintenance, alarm handling and colour-consistency control. Bilingual operation manuals are supplied.
IR temperature profiling: a nine-point thermocouple survey plus part-attached thermocouple runs for both recipes, documented in an oven profiling report. Zone power and airflow are fine-tuned on site against the real batch load, and the final acceptance basis is agreed in writing before FAT/SAT.
After-sales: spare parts kit (IR emitters, thermocouples, fan bearings, contactors), remote diagnostics and first-year warranty. Export documentation support, including pre-export conformity and origin documents, is available for destination markets that require it.
|
10 · FAQ |
Q: Can one oven really cure 32 mm steel springs and thin agricultural parts?
A: Yes, by switching between IR-heavy and Convection-heavy recipes in the same chamber. The achievable dwell time depends on the powder grade, batch weight and the time the thickest part needs to reach temperature. We confirm it with sample trials and part-attached thermocouples before fixing any cycle figure. For sustained high volume we will recommend two chambers or a two-zone layout.
Q: Why not use infrared only?
A: Radiation is line-of-sight. Overlapping frames and recessed cavities leave shadowed areas where powder remains undercured, while thin sheet can overheat and show colour drift. Convection wraps hot air around the whole geometry and is what makes the second mode work.
Q: Why not use convection only?
A: Forced hot air is uniform but slow on high-thermal-mass steel. Zoned IR raises the surface temperature quickly and shortens the ramp-up, which is the bottleneck on 32 mm sections.
Q: Electric IR or gas catalytic IR?
A: Choose electric IR when you change part families frequently and need fast, fine power modulation. Choose gas catalytic IR when electricity is expensive, LPG is readily available and the product mix is stable. The gas option adds a full safety package and a higher initial investment; we model the payback per batch for your site.
Q: What do you need to prepare a firm quotation?
A: The exact powder grade and its TDS, number of parts and total weight per batch, required cycles per hour, loading method and factory door/height limits, whether the 8–10 minutes is dwell after the part reaches temperature or total cycle time, the required TUS acceptance basis, available connected load, and site utility conditions.
Q: Do you supply the whole finishing line?
A: Yes. Pretreatment dip tanks, powder spray booth, curing oven, conveyors and spray booths can be engineered and quoted as one line, with a single layout drawing.
02 Key Feat
![]()
![]()
Contact Tim, Overseas Marketing & Sales Manager,
to discuss your custom spray booth requirements and secure a technical consultation.
![]()
| MOQ: | 1 |
| Price: | USD8000-USD12000/SET |
| Standard Packaging: | With regular Film and Carton |
| Delivery Period: | 15 DAYS After Deposit |
| Payment Method: | T/T |
| Supply Capacity: | 30SET/MONTH |
Dual-Mode IR + Convection Batch Curing Oven
DuoCure™ CT-DC Series — Dual-Mode IR + Convection Batch Curing Oven
One chamber. Two recipes. One capital investment.
DuoCure™ is a batch curing oven engineered for job shops and new production lines that must cure very different parts without buying two separate ovens. Zoned infrared radiation delivers rapid heat-up to high-thermal-mass steel, while high-capacity recirculating convection wraps hot air around complex, overlapping geometries. Operators switch between IR-heavy and Convection-heavy recipes from a single PLC touch screen.
Designed for electrostatic powder coating on heavy-duty leaf springs, agricultural implements, trailer chassis and structural steel components up to 3,000 × 1,500 × 1,000 mm.
|
02 · Key Features |
Two recipes, one chamber: IR-heavy for heavy steel, Convection-heavy for thin and complex parts — no second oven, no second foundation, no second footprint.
Zoned infrared: 4–6 independently controlled IR zones across roof, side walls and floor, with SCR power control for smooth 0–100% adjustment.
High-capacity convection: VFD-driven recirculation fans with adjustable nozzles deliver uniform airflow into recesses, overlaps and shadowed cavities.
Part temperature control: IR pyrometer and part-attached thermocouple interfaces monitor the workpiece itself, not just the air inside the chamber.
Recipe storage: PLC + HMI touch screen stores Spring and Agri recipes, including zone power, airflow, set-point and dwell time, for one-touch changeover.
Built for large parts: truck-in trolley / floor rail loading with a clear internal chamber of 3,500 × 2,000 × 1,500 mm (customisable).
Verifiable uniformity: designed for ±5–10°C across the work envelope, verified by a nine-point thermocouple survey and documented oven profiling.
Serviceable construction: 100–150 mm Rockwool insulation, galvanized steel interior, sealed door and anti-cold-bridge detailing; aluzinc or stainless interior available.
|
03 · Two Modes, One Chamber |
Mode A — IR-heavy | High Thermal Mass
For dense, flat steel components such as heavy-duty leaf springs up to 32 mm thick and 100 kg+ per assembly. Infrared power is raised to 70–85% while convection runs at 30–40% for trimming and uniformity. Parts are loaded in a single layer to keep a clear line of sight to the emitters. IR brings the steel surface up quickly; the core follows by conduction, which is why dwell time is always confirmed with a part-attached thermocouple rather than assumed from air temperature.
Mode B — Convection-heavy | Complex Geometries
For thinner sheet-metal assemblies such as disc harrows, ploughs and trailer chassis with overlapping sections. IR drops to 20–35% and convection rises to 70–85%. Top-and-bottom supply/return airflow with adjustable deflector nozzles wraps hot air around the shape, curing powder in crevices that radiation alone cannot reach, while lower radiant power prevents burn-through and colour drift on thin metal.
Honest engineering note: a single chamber serving both part families is a deliberate compromise, not a perfect substitute for two dedicated ovens. For sustained high volume we will recommend a two-chamber or two-zone layout. Our engineers will model your batch load and confirm the achievable cycle before any performance figure is fixed.
|
04 · Technical Specifications |
||
|
Item |
Specification |
Note |
|
Model |
CT-DC 3500 (DuoCure™ Series) |
Other chamber sizes on request |
|
Oven type |
Batch / truck-in, IR + forced convection |
Floor rail trolley; overhead conveyor interface on request |
|
Clear internal chamber |
3,500 × 2,000 × 1,500 mm (L × W × H) |
Customisable |
|
Max workpiece |
3,000 × 1,500 × 1,000 mm |
Allowance for jigs, emitter clearance and airflow |
|
Cure schedule |
Part temperature 180–200°C; dwell 8–10 min |
To be confirmed against the powder TDS and validated by sample trial |
|
Temperature uniformity |
Designed for ±5–10°C across work envelope |
Verified by nine-point thermocouple survey (TUS) |
|
IR heating |
Electric short / medium-wave emitters, 4–6 zones |
Indicative installed IR capacity 130–250 kW |
|
Convection |
VFD-driven high-capacity recirculation fans |
2–4 fans, top/bottom supply and return, adjustable nozzles |
|
Total connected load |
Indicative 150–350 kW |
Subject to heat balance, batch weight and ramp-up target |
|
Alternative heat source |
Gas catalytic IR (LPG / Propane) + convection |
Optional; indicative 3–8 kg LPG per batch, subject to configuration |
|
Control |
PLC + HMI touch screen, recipe storage, SCR power control |
Spring / Agri recipes, alarms and trend logging |
|
Temperature sensing |
IR pyrometer + part-attached thermocouple ports |
Oven profiling report supplied at commissioning |
|
Insulation |
100–150 mm Rockwool / mineral wool |
Adds approx. 100–150 mm per side to outer dimensions |
|
Interior |
Galvanized steel |
Aluzinc or stainless steel optional for continuous 200°C duty |
|
Safety design basis |
NFPA 86 (EN 1539 on request) |
Independent high-limit, safety interlocks, purge, explosion relief |
|
Power supply |
380–415V / 50Hz / 3-Phase, customisable |
415V / 50Hz / 3-Ph configured for East African industrial supply |
|
Loading |
Truck-in trolley on floor rail |
Jigs and fixtures engineered to part geometry |
Plain-text version — use this if your CMS breaks tables:
Model: CT-DC 3500 (DuoCure™ Series)
Oven type: Batch / truck-in, infrared + forced convection
Clear internal chamber: 3,500 x 2,000 x 1,500 mm (L x W x H), customisable
Maximum workpiece: 3,000 x 1,500 x 1,000 mm
Cure schedule: part temperature 180-200°C, dwell 8-10 min (to be confirmed against powder TDS)
Temperature uniformity: designed for ±5-10°C, verified by nine-point thermocouple survey
IR heating: electric short/medium-wave emitters, 4-6 independently controlled zones
Convection: 2-4 VFD-driven recirculation fans, top/bottom supply and return, adjustable nozzles
Total connected load: indicative 150-350 kW, subject to heat balance
Alternative heat source: gas catalytic IR (LPG/Propane) + convection, optional
Control: PLC, HMI touch screen, recipe storage, SCR power control, VFD fans
Sensing: IR pyrometer, part-attached thermocouple ports, oven profiling report
Insulation: 100-150 mm Rockwool; galvanized steel interior (aluzinc / stainless optional)
Safety design basis: NFPA 86 (EN 1539 on request), independent high-limit and interlocks
Power supply: 380-415V / 50Hz / 3-Phase, customisable
Loading: truck-in trolley on floor rail
|
05 · Heating Options: Electric vs Gas Catalytic IR |
Electric IR + Convection — standard configuration
Electric emitters reach full output instantly and shut down instantly. With SCR power control they can be modulated continuously across 4–6 zones, which is what makes rapid recipe changeover and tight uniformity achievable. Where two part families are cured in the same chamber on the same shift, this is the configuration we recommend.
Gas Catalytic IR (LPG / Propane) + Convection — optional configuration
LPG reacts flamelessly on a precious-metal catalytic surface and converts fuel energy directly into medium/far infrared radiation. Running cost can be roughly half that of electric IR, which suits sites with high electricity tariffs and a steady, repeatable product mix. The trade-offs are slower response, coarser power modulation and a substantially heavier safety package: gas train, pre-ignition purge, LEL monitoring, flame supervision, CO and ventilation interlocks, and explosion relief. Tell us your local tariff, gas availability and authority requirements and we will model the payback per batch.
|
06 · Control, Safety & Site Power |
Control: A PLC with HMI touch screen stores independent recipes for each part family. Zone power, airflow, set-point, ramp and dwell are recalled with one touch. SCR power controllers translate the recipe into actual emitter output; VFDs set convection intensity. Alarms, interlocks and temperature trends are logged for traceability.
Safety: The oven is designed to NFPA 86 as a basis, with EN 1539 available on request for projects following European practice. Safety functions — independent high-limit cut-out, purge, fan/gas/over-temperature/door interlocks and explosion relief — are hard-wired and do not depend on PLC software logic. Please confirm with your local authority and insurer which standard governs site acceptance before the technical agreement is signed.
Site power: Configurable for 380–415V / 50Hz / 3-Phase. In regions where supply voltage fluctuates widely, we recommend a wide-range control circuit, phase-sequence / phase-loss / over- and under-voltage protection and UPS support for the PLC and HMI. These conditions are recorded in the FAT/SAT scope so that acceptance criteria reflect the real grid, not an ideal one.
|
07 · Applications |
Heavy-duty leaf springs and suspension components, up to 32 mm thick and 100 kg+ per assembly.
Agricultural implements: disc harrows, ploughs, cultivator frames, harvester components.
Trailer chassis, truck frames, structural steel fabrications and welded assemblies.
Any mixed-product job shop curing high-mass and thin-gauge parts on the same line.
Electrostatic powder coating with Interpon® and equivalent polyester / epoxy-polyester systems; cure windows are always confirmed against the coating supplier's Technical Data Sheet.
|
08 · Complete Line & Related Equipment |
DuoCure™ is supplied as a standalone oven or as part of a complete surface finishing line. CoatTech designs and integrates:
Multi-stage immersion dip tanks — degreasing, rinsing, phosphating or silane conversion coating, and drying. Silane pretreatment runs at ambient temperature, produces almost no sludge and can be shared across steel, aluminium and galvanized substrates, reducing both CAPEX and effluent treatment on a new site.
Standalone powder spray booth — cartridge filter recovery, manual or automatic guns, colour-change options, overhead conveyor integration.
Automotive and industrial spray booths, 220°C high-temperature curing ovens for heavy components, conveyorised coating lines, and overhead electric retractable canopies for loading and staging areas.
Ask us for a single layout drawing covering pretreatment, powder application, curing and material handling, so that tank sizes, booth clearances and oven chamber dimensions are engineered as one system.
|
09 · Commissioning, Training & IR Profiling |
On-site commissioning: CoatTech engineers supervise installation, dry-run, safety interlock verification and first-article production. Scope, engineer-days and travel arrangements are quoted separately.
Operator training: recipe changeover, daily checks, emitter and fan maintenance, alarm handling and colour-consistency control. Bilingual operation manuals are supplied.
IR temperature profiling: a nine-point thermocouple survey plus part-attached thermocouple runs for both recipes, documented in an oven profiling report. Zone power and airflow are fine-tuned on site against the real batch load, and the final acceptance basis is agreed in writing before FAT/SAT.
After-sales: spare parts kit (IR emitters, thermocouples, fan bearings, contactors), remote diagnostics and first-year warranty. Export documentation support, including pre-export conformity and origin documents, is available for destination markets that require it.
|
10 · FAQ |
Q: Can one oven really cure 32 mm steel springs and thin agricultural parts?
A: Yes, by switching between IR-heavy and Convection-heavy recipes in the same chamber. The achievable dwell time depends on the powder grade, batch weight and the time the thickest part needs to reach temperature. We confirm it with sample trials and part-attached thermocouples before fixing any cycle figure. For sustained high volume we will recommend two chambers or a two-zone layout.
Q: Why not use infrared only?
A: Radiation is line-of-sight. Overlapping frames and recessed cavities leave shadowed areas where powder remains undercured, while thin sheet can overheat and show colour drift. Convection wraps hot air around the whole geometry and is what makes the second mode work.
Q: Why not use convection only?
A: Forced hot air is uniform but slow on high-thermal-mass steel. Zoned IR raises the surface temperature quickly and shortens the ramp-up, which is the bottleneck on 32 mm sections.
Q: Electric IR or gas catalytic IR?
A: Choose electric IR when you change part families frequently and need fast, fine power modulation. Choose gas catalytic IR when electricity is expensive, LPG is readily available and the product mix is stable. The gas option adds a full safety package and a higher initial investment; we model the payback per batch for your site.
Q: What do you need to prepare a firm quotation?
A: The exact powder grade and its TDS, number of parts and total weight per batch, required cycles per hour, loading method and factory door/height limits, whether the 8–10 minutes is dwell after the part reaches temperature or total cycle time, the required TUS acceptance basis, available connected load, and site utility conditions.
Q: Do you supply the whole finishing line?
A: Yes. Pretreatment dip tanks, powder spray booth, curing oven, conveyors and spray booths can be engineered and quoted as one line, with a single layout drawing.
02 Key Feat
![]()
![]()
Contact Tim, Overseas Marketing & Sales Manager,
to discuss your custom spray booth requirements and secure a technical consultation.
![]()